Henan Xijian New Building Materials Co., Ltd
Product
Zhongtai Sanbao S-700 Tile Adhesive (High-Performance Type)
1. Use potable water; mix thoroughly before use, and do not add any other construction materials for mixed application. 2. The ideal working temperature is 5°C–35°C.
Category:
Municipal products
Keywords:
Introduction
Construction Requirements:
1. Use potable water; stir thoroughly before use, and do not mix with any other construction materials.
2. The suitable construction temperature is 5°C–35°C.
Construction Instructions:
Step 1: First, add the potable water to the mixing bucket, then gradually add the tile adhesive in measured amounts. The mixing ratio is: 1 part water + 4 to 5 parts dry powder. Use a low-speed (300 r/min) electric mixer (750 W) to stir thoroughly until the mixture is uniform, ensuring there are no dry powder lumps remaining.
Step 2: After hydrating (letting it sit) for 15 minutes, perform a second mixing for 1–3 minutes before use. Once the tile adhesive has been hydrated, do not add any more water or dry tile adhesive powder.
Step 3: Apply an appropriate amount of tile adhesive to the substrate, then use a notched trowel with a suitable tooth pattern to spread the adhesive into full, even ridges at a 60–70 degree angle along a straight line. Press the tiles firmly onto the adhesive‑coated substrate to ensure proper adhesion and adjust them to the correct position.
Step 4: If the grooves on the back of the tile are relatively deep, or if the stone or tile is large and heavy, you should apply adhesive to both sides—applying mortar to both the working surface and the back of the tile.
Step 5: The mixed tile mortar should be used within 4 hours. Stir and remix every half hour to maintain good workability; hardened tile adhesive must not be used.
Step 6: Once the tiles have been laid, they must not be moved again for 15 minutes. If adjustments are necessary, remove the tile adhesive from both the back of the tile and the installation surface, then reapply the adhesive to securely reattach the tiles.
Implementation Standard: JC/T547-2017
Indoor Applications |
Outdoor Applications |
||||
Grassroots |
Tile water absorption rate |
Tile size |
Grassroots |
Tile water absorption rate |
Tile size |
Stabilize base layers such as cement mortar, concrete, and wall tiles. |
>0.2% |
Single tile size ≤ 800mm x 800mm |
Stabilize base layers such as cement mortar, concrete, and wall tiles. |
>0.2% |
Single tile ≤ 300mm x 300mm |
<0.2% |
Single tile ≤ 300mm x 600mm |
<0.2% |
Single tile ≤ 100mm x 200mm |
||
Shelf life: 6 months
Notes:
1. After the concrete has fully cured for 24 hours, subsequent surface work (such as grouting) may be carried out; however, no vibrating machinery may be used on the construction surface. The concrete will reach higher strength after 28 days.
2. This product contains cement components; if it accidentally gets into your eyes, rinse them thoroughly with clean water immediately or seek medical attention at a hospital as soon as possible.
3. Do not expose to water during construction or within 48 hours after completion; the working environment temperature should be between 5–35°C.
Notice: If users exceed the product’s specified performance range during use, or if they add other materials on their own during operation, our company shall not be liable for any resulting losses or responsibilities. Should you have other needs, please feel free to explore our other products.
Recommended
undefined
Online Message
Leave a message online now to get a free product quote.
Contact Information
Phone:+86-400-6786-157
Mobile phone:+86-13838719394
Email:m13838719394@163.com
Address: 30 meters ahead of the South Ring Bridge No. 2, South Ring Road, Industrial Park, Shangji Town, Xichuan County, Nanyang City, Henan Province
Online consultation
Leave an online message and get a free quote